Arrester Series Supplier

Home / Products / High Voltage Arrester / Arrester Series
Arrester Series

Arrester Series

Arester is a kind of overvoltage protector mainly appled for the proteclion of various electrical appliances (such as transformer ,switchcapacitor ,trap, mutual inductor ,generator ,motor and power cable etc.) in power system .ralway electrication system and communicationsystem from being damaged by atmosphere overvoltage, operaion overvoltage and power frequency temporary overvotage etc. The arresteliis the basis ofinsulalion coordinalion in power svstem, The core elements ol melal oxide arrester lresistor disci apoles an advanced formulate with zinc oxide as the main malerial and has an outstanding nonlinear properies (voltage-ampere).That is, under the normal operatingvoltage, the current passing through is only on microampere level, When overvoltage is incurred the current passing through can be thousands of amperes instantly and the arrester is switched into conduction to release the energy of overvolage. By this means the damage causedby overvoltage on the electric transmission and transformation equipments can be efectively restrained .The traditional slicon carbide arrester has high steep wave discharging voltage caused by steep wave discharging and the operatin wave discharging voltage is high caused bydischarging decentrality .While the zinc oxide arrester has good steep wave response properties and make no delay on steep wave voltageand provide low residual vollage during operation; and also has the advantage of no discharging decentrally .The aresler can grealy improvethe protective margin of the steep wave and operation wave, And on insulalion coordinalion, the proaclive margins of steep wave. liohtenincwave and ooeralion wave are neariy consistent and best oroteclion can be provided for the power eouioments, Composte coaling melal oxidarrester applies integraled extruding shaping and both-end envelopment techniques and can provide high performances of sealing and antiexplosion ,polution resistance, free of cleaning and reducing the wet fashover in foggy conditions .The product is also featured by electricaerosion resistance ,aging resistance ,small volume, ight weight and easy installation and maintenance; and is the upgraded new generationproduct of porcelain sheath arrester.

The applicable standards of the product include GB11032-2000(eqv IEC60099-4:1991) Alternating non-clearance current metal oxide light-
ning arrester and JB/T8952-2005AC System composite Coating Non-clearance Metal Oxide Lighting Arrester.

Power supply frequency 48Hz-62Hz
Ambient temperature -40°C~+40℃
Maximum wind speed <35m/s
Altitude <2000m
Earthquake intensity ≤8
Ice thickness ≤10mm

1. Long-term applied power frequency voltage does not exceed its constant operation voltage.
2. Sunray radiation: The impact of a maximum sunray(1.1kW/m) has been taken into account in the product form testing.
If other heat resources exi st around the arrester, please consult the manufacture for the application of arrester.

1. Small in size , light in weight , durable in collision , clash and breakage free in transportation, easy in installation, suitable for application in the switchboard;
2. Special structure, integrated extruding shaping , without air gap, good sealing performance, damp prevention and explosion prevention;
3. Long creepage distance, good hydrophobicity performance, strong pollution resistance abilities , and stable performance, reducible in operating maintenance;
4. Zinc oxide resistor disc in special formula, small leakage current, slow aging speed, long service life
5. The actual DC reference voltage , square wave discharge capacity and heavy current tolerance value are all higher than the state standards.

1. Before installation, the arresters shall be stored in clean and dry rooms and kept away form the corrosions by corrosive gas or liquid.
2. Before put into operation, preventative testing shall be made on the arrester. And after the arrester has been put into operation, regular testing shall be made as follows and comparison shall be made with the data before the oPeration according to the attached table.(Every 5 years for arrester of 10KV or under, and every 2 years for arrester of 35KV and above)
a. Measure the insulation resistance of the arrester; c. Measure the leakage current under the reference voltage of 0.75 time direct current of 1mA b. Measure the reference voltage of the arrester under the direct current of 1mA

The Zinc Oxide lighting arrester protects the electrical equipments in AC power systems against being damaged by atmos-pheric over-
voltage and operational over-voltage.

Message Feedback